1, the charger is damaged first check whether the socket has electricity, it is best to use the original charger to charge, if not charged into the electricity, try to change the socket or charger. The charging port of the mobile phone has dirty things or oxidation, which will affect the charging effect, resulting in no charge, you can use the pin to clean up the charging interface, and clean up the dirty things and oxides as much as possible.
2, caused by insufficient charging time. Extend the charging time of the iPhone, wait until the iPhone is charged for more than 10 minutesBecause Apple's phone battery is less than 5% can not open the machine. Therefore, it is recommended that you wait patiently for 10 minutes after the charging of the Apple phone after the power off, the Apple phone should be able to turn on. Charging interface into the ash, resulting in poor contact charger can not charge.
3, Apple x can not charge the reasons may be: charger mismatch, data cable damage, charging interface blocked or damaged, low temperature, excessive battery discharge, etc., with a good charger and data cable to recharge, still do not need to repair the charging interface. If you use a cable to connect the Apple x to a computer, it will not chargeIf the battery is faulty, unlock the phone and select the charging storage mode.
4, Apple x does not charge into the first must be to check whether the charger or data cable is damaged, or the use of inferior charging equipment. If your iPhone x has bumped or dropped recently, it may be due to a malfunction in the battery management IC that is causing it to fail to charge. Sometimes a bug in the Apple x system can also cause it to fail to charge. The tail plug or data cable connector is dirty or oxidized. Apple x battery damage, failure or excessive wear.
5, use the wall power outlet, and check the charging cable, USB wall adapter and wallThe connection between the type socket or AC power cord is not strong, or try another socket. Remove any debris from the charging port on the bottom of the device, then plug the charging cable tightly into your device. If the charging port is damaged, your device may need an overhaul. Let the device charge for half an hour.
Caused by insufficient charging time. Extend the charging time of the iPhone, wait until the iPhone is charged for more than 10 minutes, because the iPhone cannot be turned on when the battery is less than 5%. Therefore, it is recommended that everyone in AppleWhen charging after the phone is powered off, wait patiently for 10 minutes, the Apple phone should be able to turn on. Charging interface into the ash, resulting in poor contact charger can not charge.
Battery management IC damage This situation is mostly because the mobile phone fell to the ground to lead to the motherboard components out of welding, the probability is very small. If the battery is not charged and the motherboard is damaged, the store will charge you more than 500 so-called replacement motherboard fees, in fact, only need more than 100 replacement power IC is good. Non-original charger, charging cable damage this easy to do, ask someone for an original iPhone charger and charging cable to tryI know.
Apple x can not charge the reasons may be: charger mismatch, data cable damage, charging interface is blocked or damaged, the temperature is too low, excessive battery discharge, etc., with a good charger and data cable to recharge, still do not need to repair the charging interface. If you use the data cable to connect the Apple x to the computer, it will not be able to charge the problem, you need to unlock the phone and select the charging storage mode.
Apple x does not charge into the first must be to check whether the charger or data cable is damaged, or the use of inferior charging equipment. If your iPhone x has been knocked or dropped recently, thenBecause the screen of the phone is broken, it cannot be displayed on the screen.
Low battery: If the battery is low, the phone cannot be charged. At this time, you need to fully charge the charging bank before using it. Overheat: During use, if the charger overheats, it may automatically stop the output current to protect the battery and device. At this time, wait for the charging bank to cool down before using. Poor contact with the charging treasure: If the contact between the charging treasure and the mobile phone is poor, the mobile phone cannot be charged.
The reasons why the Apple x cannot be charged are: the charger does not match, the data cable is damaged, the charging port is blocked or damagedThe temperature is too low, the battery discharge is excessive, etc., with a good charger and data cable to recharge, still do not need to repair the charging interface. If you use the data cable to connect the Apple x to the computer, it will not be able to charge the problem, you need to unlock the phone and select the charging storage mode.
The reason for not charging may be: the mobile phone system is deranged, and the battery power cannot be checked normally, the following Xiaobian will teach you the solution. Tool Apple 11 IOS12 Method: Open [Settings] first. Click on the Battery option. Click on the "Battery Health & Charging" option. Turn the "Optimize battery charge" option after the circle towardSwipe left to turn off the feature. In the pop-up window, click the "Close" option.
Using a non-original charger, it is easy to charge no electricity, because the charger specifications are not up to standard, replace a qualified charger. Check whether the data cable is normal. Replace with a new data cable. The display plug symbol is normally full to show, now full or insufficient power, but you can show that there is no problem with the phone tail plug, first change a charger to try, if it is still not good, the battery is broken.