Open the phone Settings and find the battery options. In battery Settings, find the reverse charging option and turn it on. Connect devices that need to be charged, such as headphones, wristbands, etc., with the charging port of vivo mobile phones. Ensure that the vivo phone has enough battery power, you can start to use the reverse charging function.
vivo reverse chargeThe phone needs otg, open the steps: find the "Setting" option on the mobile desktop; Click to enter the Settings, find the "more Settings" option, and click to open; Find the "OTG" column in more Settings, turn on the OTG button switch, and then use the otg cable connection, 5 minutes without use, will automatically turn off the otg function.
X60 supports wired reverse charging function, you can enter the Settings - other networks and connections - open the OTG switch, connect one end of the OTG cable to the charging interface of the device, and connect the other end of the mouse, U disk or other external devices to use.
Opening method: Enter the phone Settings -- battery -- more Settings, the "wireless reverse charging" switch can be turned on. Note: After this function is enabled, if there is no charging for other devices for a long time, it will automatically turn off; This function cannot be enabled when the battery battery is less than or equal to 20%.
Refer to the following information vivo wireless backcharging : The mobile phone is equipped with vivo wireless backcharging charger and data cable connected to wireless charger vivo wireless backcharge , and then put the mobile phone is (vertical) or horizontal in the wireless charger base left and right center position vivo wireless backcharge , wireless charging can be achieved, the indicator light will have breathing effect, 5 seconds after extinguishing, plug and play, convenient and quick.
Connect the phone's standard charger and data cable to the wireless charger, and then put the phone in the center position of the left and right of the wireless charger base, wireless charging can be realized, and the indicator light will beHas a breathing effect, 5 seconds after extinguishing, plug and play, convenient and quick.
Operating phone: vivox90 Operating system: OriginOS3The method of enabling VIvox90 wireless charging is as follows: First, go to the phone Settings option. Then find the battery in the Settings screen. Then find the charging Settings in the picture. Finally slide down to find and turn on wireless reverse charging. The principle of wireless charging: The wireless charging system mainly adopts the principle of electromagnetic induction, and realizes the energy transfer through the energy coupling of the coil.
The steps are as follows. According to the application of elder brother technology network. Make sure your phone is a yesThere is a wireless charging version. Open your phone's Settings and tap Battery Settings. Select the charging Settings option and check unlimited reverse charging to complete the wireless charging Settings.
vivo/iQOO currently supports wireless charging devices are: iQOO 11 Pro, X90 Pro, X90 Pro, X Fold, iQOO 10 Pro, X80 Pro Snapdragon, X80 Pro Guet, X Fold, X Note, iQOO 9 Pro, X70 Pro, iQOO 8 Pro.
Click to open. Then in the Settings main screen, swipe down to find [More Settings] and click Open. Then find [OTG] in the more Settings screen and click Open. Then in the OTG interface to open or close the OTG function behind the vivo wireless backcharge switch can be.2. Take vivoY3 as an example, the way to turn on reverse charging is as follows: First, find [Settings] on the desktop of the phone and click Open. Then in the Settings main screen, swipe down to find [More Settings] and click Open. Secondly, find [OTG] in the more Settings screen.And click Open. Then turn on the switch behind the OTG function on the OTG interface.
3. Take vivo mobile phone as an example, the method of turning on reverse charging is as follows: First, find and open the Settings on the desktop. Swipe down on the Settings main screen to find more Settings. After entering more Settings screen, find OTG Settings and click open. After entering, turn on or off the switch behind the OTG function.
4, vivo reverse charging requires the mobile phone to have otg, open the step: find the "setting" option on the mobile desktop vivo wireless reverse charging ; Click to enter the Settings, find the "more Settings" option, and click to open; Find the "OTG" column in more Settings, turn on the OTG button switch, and then use the otg cable connection, 5 minutes without use, will automatically turn off the otg function.
5, opening method: Enter the phone Settings -- battery -- more Settings, the "wireless reverse charging" switch can be turned on. Note: After this function is enabled, if there is no charging for other devices for a long time, it will automatically turn off; This function cannot be enabled when the battery battery is less than or equal to 20%.
Connect the standard charger and data cable of the mobile phone to the wireless charger, and then put the mobile phone in the center position of the left and right of the wireless charger base, you can realize wireless charging, the indicator light will have a breathing effect, 5 seconds later, plug and play, convenient and quick.
vivox90 wireless charging open method First go to the phone "Settings" option, then find "battery" in the "Settings" interface, and then find the figure "charging Settings", and finally slide down to find and "open" "wireless reverseTo charge ".
Fold, X Note, iQOO 9 Pro, X70 Pro, iQOO 8 Pro. Wireless charging, also known as inductive charging or non-contact inductive charging, based on the principle of electromagnetic induction, it does not need to transmit electricity to the device like the traditional wired charger, but the device that needs to be charged can be charged by contacting the wireless charging base. More use doubts can enter vivo official website -- my -- online customer service -- input labor, consult online customer service feedback.
vivo/iQOO currently supports wireless chargingThe equipment is: iQOO 11 Pro, X90 Pro, X90 Pro, X Fold, iQOO 10 Pro, X80 Pro Snapdragon, X80 Pro Guet, X Fold, X Note, iQOO 9 Pro, X70 Pro, iQOO 8 Pro.
You can enter the phone Settings -- battery -- more Settings -- Turn on "wireless reverse charging", turn onAfter starting, the peripheral can be provided with up to 10W charging power supply for quick charging. Note: After this function is enabled, if there is no charging for other devices for a long time, it will automatically turn off; This function cannot be enabled when the electrical capacity of the head stove is less than or equal to 20%.
Opening method: Enter the phone Settings -- battery -- more Settings/charging Settings, turn on the "wireless reverse charging" switch. Note: After this function is enabled, if there is no charging for other devices for a long time, it will automatically turn off; This function cannot be turned on when the phone battery is less than or equal to 20%; If you do not see the function Settings menu, the current model does not support this functionI can.
Open your phone's Settings and find the battery options. In battery Settings, find the reverse charging option and turn it on. Connect devices that need to be charged, such as headphones, wristbands, etc., with the charging port of vivo mobile phones. Ensure that the vivo phone has enough battery power, you can start to use the reverse charging function.
vivo reverse charging requires the mobile phone to have otg, open the steps: find the "setting" option on the mobile desktop; Click to enter the Settings, find the "more Settings" option, and click to open; Find the "OTG" section in More Settings, turn on the OTG button switch, and then use oThe otg function will be automatically turned off if the tg line is not used for 5 minutes.
X60 supports wired reverse charging function, you can enter the Settings - other networks and connections - open the OTG switch, connect one end of the OTG cable to the charging interface of the device, and connect the other end of the mouse, U disk or other external devices to use.
Taking vivoY3 as an example, the way to turn on reverse charging is as follows: First find [Settings] on the desktop of your phone and click Open. Then in the Settings main screen, swipe down to find [More Settings] and click Open. Next found in the more Settings screen[OTG], and click Open. Then turn on the switch behind the OTG function on the OTG interface.