1, resin diy manual production method is as follows: prepare the resin material, that is, resin AB glue (can be bought online), but also prepare some scissors, cups and droppers. Visualize in advance what you're going to do with resinThe general appearance of the work, if you need molds and wood blocks should be prepared in advance. According to the properties of the purchased resin, determine the ratio relationship between resin A glue and B glue. Generally A3∶B1 or A5∶B1, but also 1:1, so make sure.
2, the base material should be selected first, the idea of drawing lines on the material, using a saw and a knife to carve out the outline, and then sand. The stone is then placed on the material, a line is drawn along the shape, a hole is dug with a chisel, and then a spray paint is used to decorate the stone. Then apply Vaseline to the base, and use a glue gun to glue the holes and place the rocks.
3, the material needs color embroidery thread, resin glue, hardware ear hook, dried flowers, some hardware tools and silicone mold, etc., glue A glue and B glue ratio 3: 1. Mix the two and stir, stir thoroughly, wait for the bubbles to defoamer, pour the prepared resin glue into the mold, wait for 12 hours, release the mold, get the dried flower resin pendant we need, make tassels, assemble: dried flower resin glue tassels, finished products.
4, the fun and exploration of DIY resin handicrafts Since I stepped into the world of resin art, I have been immersed in it, from the initial attempt to gradually master the skills, every step is full ofUnexpected surprises and challenges.
5, epoxy resin is a commonly used material, widely used in decoration, DIY and other fields.
6, in fact, is the violent bear DIY, with a variety of pigments after the color directly to the white violent bear a fierce operation, and then wait for dry. Choose the color you want, there will be a teacher to help deploy the color, of course, their own paint is also very decompression, and then you can start to pour the paint, so that it is poured with violent bears, the pattern is still very beautiful. After sitting down, choose the color first, you can choose 2 to 4 colors.
The method of making a wireless charger is as follows: Attach the module to the place where the MicroUSB interface is compared. Connect the MicroUSB or Lightning port on the module to your phone. If there is double-sided tape on the receiver, you can glue it directly to the back of the phone. If it doesn't come with it, you have to figure it out yourself. Choose the most suitable position, be careful not to let the part of the connection line have the phenomenon of warping.
Sending end coil chainThe wired power supply generates electromagnetic signals, and the receiving coil senses the electromagnetic signals at the transmitting end to generate current to charge the battery. Prepare materials and tools: Wireless Charger kit: charger, charging base, charging cable, transmitter and receiver. iPhone6 Wireless Charging kit: reed tube, wired tail plug, iPhone6 back cover, iPhone6 back cover glass. Installation is very simple, straight above.
One of the self-wound coil is connected to the charging circuit, 555 output pin (third pin) is connected to an output tube (oneself at will, but to the high-frequency power tube)Wind the coil and connect the two coils close to each other (about 1 cm or so will have a very sufficient charging current) to turn on the power supply and charge it wirelessly! The efficiency of this circuit is very low, because there is only half a wave peak high frequency so the loss is relatively large, but the principle is quite simple and easy to produce.
There are no magnets in the wireless charger. If you place an energized wire on a magnetic compass, you can see that these currents also produce a magnetic field. If you use a moving magnet instead of an alternating current wire, you're ready. The varying currents in the wires create varying magnetic fields. And the changing magnetic field will makeA current is generated in the other coil. The more loops you create, the stronger the effect.
Radio waves We all know that electromagnetic waves can be used to transmit information, so in theory, as long as the frequency is high enough, it can also transmit energy. This wireless charging method is perhaps the closest to what people imagine wireless charging looks like, an electromagnetic wave generator is placed at the power source, and then the energy is transmitted to the receiving antenna through the transmitting antenna, and then the electromagnetic wave signal is re-converted into electricity for the device.
Tools/Raw materials Unsaturated polyester resin Steps/methods First design the shape of the resin crafts, and then make the mold with silicone rubber. Then add an appropriate amount of filler into the unsaturated resin and stir well. Then add curing agent and accelerator in the unsaturated resin, stir evenly and pour into the mold: finally, after curing the resin, you can release the mold, you can get the desired shape of the crafts.
Take a plastic box, pour not less than 60 degrees of hot water, and then put the right amount of free resin into the hot water, so that the free resin soft can be shaped. When shaping, it must be fast, otherwise it will harden over timeIt's not easy to shape. To make the free resin other colors, you can add pigments and stir well. After shaping, you need to wait for a period of time to let the free resin cool and harden, and it will become extremely hard.
The resin is a polymer resin material. Free resin is a kind of polymer resin material with thermoplastic characteristics. It is usually used to make various models, crafts and toys. The free resin can become soft after heating and can be cast and formed by a mold. The molded resin has the characteristics of high hardness, impact resistance and wear resistance.
It is unique and cannot be copied only by drawingTo create the fluid bear, the artist created the color of the violent bear doll without any decoration. The first step to making a fluid bear: Mix the paint, mix the paint layer by layer, and stir a few times. Step 2: Start to create, tune it and you can fall down. Pour paint over the bear, first where the neck and limbs meet, then the body and head.
No. Free resin is a polymer resin, is a liquid strong material, adding curing agent reaction curing, can rely on mold casting molding, rubber is a kind of elastic polymer, not liquid strong material, the two are different materials, so free resin is not rubberGlue. The free resin can be molded and turned into a model, which can be used as a mold after cooling, and can also be used repeatedly, which is very suitable and practical for turning various small parts.
methyl methacrylate. According to the relevant information query, the main component of free resin is methyl methacrylate, non-toxic, with a slight pungent smell, after solidification odor automatically volatilized. Free resin is a biodegradable polymer material. Plastic products have entered thousands of households, and more and more plastic is discarded in the garbage. Because these synthetic polymers are very stable, acid-resistant, alkali-resistant, mothless and mildew free to bury them in the ground for hundreds of yearsIt doesn't rot.
1, resin diy manual production method is as follows: prepare the resin material, that is, resin AB glue (can be bought online), but also prepare some scissors, cups and droppers. Plan in advance what you want the resin to look like, and prepare molds and wood blocks if you need them. According to the properties of the purchased resin, determine the ratio relationship between resin A glue and B glue. Generally A3∶B1 or A5∶B1, but also 1:1, so make sure.
2. Add the appropriate amount of auxiliary materials to the epoxy resin in a certain order (if the operating temperature is low, you can first heat the epoxy resin to the appropriate viscosity range, easy to operate), and let it stand for 5 minutes after mixing, so that the bubbles generated in the mixing disappear. Prepare the modified amine curing agent for use (pay attention to sealed storage before use, avoid contact with air, so as to avoid moisture to make the surface of the cured product white).
3, resin crafts are resin as the main raw materials, stone powder, resin waste through the mold casting molding, the use of spray painting, painting, electroplating and other processes made of a variety of beautiful image lifelikeThe characters, animals, birds, landscapes, utensils, etc., can achieve a variety of simulation effects. Such as: imitation copper, imitation gold, imitation silver, imitation crystal, imitation agate, imitation marble, imitation white jade, imitation wood and other resin crafts.
4, configuration slurry: according to the resin products to be made to choose the appropriate material to configure slurry, often produced resin classes are imitation jade, imitation agate, imitation red rice, imitation metal and so on. We in this article to explain specifically, the common resin crafts white embryo formula production tutorial. First of all, pour the resin into the bucket, add about 2% of the accelerator, stir evenly, and then add about 1:1 stone powder, fully stirEven the offspring.