1, start the computer Start the computer iro wireless charging function , and hold down the DEL key until the BIOS Settings window appears (usually blue background, yellow English words). Go to BIOS Settings Select and go to the second item, BIOS SETUP.
2, what BIOS has done before iro wireless charging function ? You are advised to restore the previous Settings. alsoTry the following troubleshooting steps: No bootable device can be found No bootable device can be found, please confirm whether the hard disk is recognized, reset the hard disk to power on, and then confirm whether the problem is solved.
3, iro wireless charging function Have you ever encountered the problem that the BIOS setting interface is displayed after the computer is powered on iro wireless charging function ? This is part of the hardware parameter setting and usually requires pressing F2 or Delete to access. If the computer automatically enters this interface, it may be because the hard disk is notThe identification or operating system is improperly installed. This article will give you the solution. First, you need to confirm that the hard drive is correctly identified.
4, may be BIOS Settings or power Settings out of the iro wireless charging function problem. To ensure the normal operation of the system, perform the following operations. Check the power fan. Open the chassis and observe the rotation of the power fan. If the power fan only turns briefly, this is normal. However, if it is rotated for a long time, there may be a power failure. Check BIOS Settings Check BISettings '> Asus bios Settings Press the ↓ key to select Advance BIOS Features and press Enter. Press ↓ to select First BOOT Device, press Enter to go to the First BOOT Device screen, and press ↓ to select "Floppy", that is, to set the system to boot from the floppy drive.
You are advised to restore the factory default Settings. After starting up, press F2 repeatedly to enter BIOTo set S, move the cursor to Save& exit and find Load Optimized Defaults, which means called to the factory Settings, optimized in general. Move the cursor to this item with the up and down arrow, and then press enter to prompt whether to load the default value, the system default is "N", that is, no. Enter Y for Yes.
Method 1: Restart the notebook and press F2 repeatedly during the boot self-test. Method 2: After entering the system, click on the Start screen, and then select 【 Settings 】--【 Update and security 】--【 Recovery 】Then select Restart Now under Advanced Startup. When entering the Advanced boot Settings screen, select [Troubleshooting] -- [Advanced Options] -- [UEFI Firmware Settings] -- [Restart].
The summary interface stays in the summary interface by default, and the main contents covered under the summary interface are: BIOS information, BIOS version, creation date, EC version, ME version, CPU information and memory information, system language, system date, etc. We can control and adjust the direction up and down left and right keys, you can set the system language.
HuaAsus motherboard supports the DEL hot key to enter the BIOS, quickly press the DEL key to enter the BIOS interface, the following is the ASUS motherboard BIOS interface, you can see the basic information of the computer hardware: BIOS version, processor model/reference frequency/core voltage, memory capacity/frequency/voltage, etc., you can also switch the menu language. There are easy modes and advanced modes for players to do simple or complex Settings.
ASUS motherboard can be set up by the following steps: When you see the boot screen, press the "del" key continuously, will enter the BIOS setting screen. As shown in the picture below:At this time, we press the "F8" key, and the startup menu selection window will be entered, as shown below: Through the above steps, you can select the U disk to start.
1, Canon PowerShot SX620 HS black digital camera 2020 megapixel 25x zoom. Price 1499 yuan This camera than just iro wireless charging function series is better. The same place has both 20.2 million pixels and WiFi transmission iro wireless charging function ; The advantage of this model is that it has a 25x zoom, which allows you to shoot further away, such as photographing animals, distant landscapes, and so on. The color expression is gorgeous, can shoot video.
2, the size of the sensor, the card machine is generally from 1/6 inch to 1/5 inch, the bigger the better, that is, 1/6 of the good, but the price is expensive. Sensor types, CCD, COMS, each have their own benefitsBut the latter is now more common and has an advantage mainly in low light. CCD is better in detail when the light is sufficient, but the structure is complex, and there is no advantage in the small sensitive element of the card machine.
3, fashion choose SONY, photography choose Nikon, Canon, SONY camera is very good, camera in general, low cost performance.
4, macro parameters are not too good. The card machine's mode multi-LCD screen is a little smaller and not as clear as the nikon.
5, enough. Recommended: Nikon S5100, 12.2-megapixel, 7-inch display, 5x optical zoom, 28mm wide Angle, HDLike, optical stabilization, 1,000 yuan. You can also look at Nikon S2500, basically the same, but there is no optical anti-shake, it is also good, cost-effective, 800 yuan, enough. These two cameras are lithium battery, the camera is small and portable. Color reproduction real, photos clear. Big brand, cost-effective, fashionable atmosphere.
6, Nikon L110 reference price: ￥1500 is a comprehensive performance of cost-effective telephoto machine. The machine has 12.1 million effective pixels and uses a Nikkor 15x optical zoom lens with an equivalent focus range of 28-420mm. The machine adopts 4 sectionsAA battery power supply, strong endurance. The 460,000 pixel HD LCD display is delicate, and 720p high-definition stereo video supports optical zoom.
1, generally use wireless or Bluetooth connection, dashcam version and Apple match on the line.
2. Download and install the Youmera APP. Find the "Add Device" option in the "Youmera" APP. Found the iro dashcamDevice name, enter the default wireless password. Follow the prompts to complete the connection.
3. Open the [Youmera] APP and find [Add Device]. Find the tachograph device name, enter the default wireless password, and follow the prompts to complete the connection. If the tachograph is not connected to the wireless network, you need to check the following aspects: When the tachograph is not connected to the wireless network, the first thing to check is whether there is a problem with the Settings of the mobile phone, you can solve this problem through the permissions set by the mobile phone.
4, you can use wireless or Bluetooth connection, the specific operation can be pressedConnect according to the operating instructions of the dashcam.
5, first open the mobile phone Bluetooth, and then use the dashcam to scan the link. Bluetooth is a wireless technology standard that enables short-range data exchange between fixed devices, mobile devices and building personal domain networks (using UHF radio waves in the ISM band of 4 to 485 GHZ). Bluetooth technology was first developed by telecommunications giant Ericsson in 1994 as an alternative to RS232 data lines.
Open the [Youmera] APP and find [Add Device]. Find the tachograph device name, enter the default wireless password, and follow the prompts to complete the connection. If the tachograph is not connected to the wireless network, you need to check the following aspects: When the tachograph is not connected to the wireless network, the first thing to check is whether there is a problem with the Settings of the mobile phone, you can solve this problem through the permissions set by the mobile phone.
iro recorder use tutorial: video mode, photo mode, preview mode, display Settings, delete function. Press Video modeAfter the power switch is ON/OFF or the charger is connected, the recorder will automatically enter the recording mode and start recording, at this time, the blue light flashes. When recording, press the REC/SNAP key to stop recording. At this time, the indicator is on. Press the MENU key to access the main menu.
Download and install the Youmera APP. Find the "Add Device" option in the "Youmera" APP. Find the iro dashcam device name and enter the default wireless password. Follow the prompts to complete the connection.
iro dashcam to connect to the mobile phone method is as follows: Turn on the mobile phone WiFi, let the mobile phone connect to the WiFi of the dashcam. Open the iro dashcam APP on your phone and sign in. Find the dashcam device in the APP and click to enter the device page. On the device page, select Settings and complete the connection as prompted.
Open the [Youmera] APP and find [Add Device]. Find the tachograph device name, enter the default wireless password, and follow the prompts to complete the connection. If the tachograph is not connected to the wireless network, you need to check the following aspects: When the tachograph is not connected to the wireless network, the first thing to check is whether there is a problem with the Settings of the mobile phone, you can solve this problem through the permissions set by the mobile phone.
Open the [Youmera] APP and click [Add Device]. Find the tachograph device name, enter the default wireless password, and follow the prompts to complete the connection.