The car remote control key can be re-matched through initialization matching, synchronous matching, etc.
If it is in the case of remote control failure, you can do the following match: In the case of all doors closed ignition switchTurn on (the second gear instrument lights are all on) before turning off, and then remove the key; Press and hold the lock button on the key for 10s, and press and open the lock five times within 5S; Let go of both buttons and press either one again. OK, if it doesn't work out. Do it again in the above way.
Car key matching tutorials Many owners do not pay attention to their car keys, car keys fall on the ground or water is often a thing, so it is easy to cause damage to the car key internal chip original, resulting in car key failure, you need to buy a new key to match.
The matching method of the car remote control key is: insert the car keyTurn on the switch and the safety light will be on for 10 minutes; Within 5 minutes after the safety light is off, turn the car ignition switch off, and then turn it on again, and the warning light will flash for about 10 minutes; Repeat the previous step for about 30 minutes to successfully match.
1, car key battery replacement, matching method: First remove the remote control cover with the screwdriver, gently remove the key tooth blade, insert the screwdriver into the hole, turn the screwdriver clockwise, completely separate the two parts of the remote control, after disassembling, take down the battery,Disassemble the circuit board and replace it with a new battery.
2, the car remote control key matching steps are as follows: need to put our vehicle ignition switch in the ON position. Align the new matching remote control with the remote control receiver next to the power window master control switch, control the time within 1-4s, and then press the unlocking and locking button of the remote control. The time is controlled within 1-4s, and the vehicle ignition switch is turned to OFF. The time is controlled within 1-4s, and the vehicle ignition switch is turned to ON.
3, the car chip key how to match the car key chip matching method car chip key pieceThe method of matching: first go to the 4S shop to buy a blank key, and then go to the slot, that is, the keyhole is played well, and finally take the matched key and the key code with the car to the 4S shop to match it. Used in the automotive field, the chip is known as a magnetically coupled forwarding system.
4, the first step: find the key chip model, usually can be found on the label on the key. Step 2: Prepare the matching tool, usually a professional matching machine, it can also be a computer and the corresponding programming software. Step 3: Connect the matching machine or computer to the OBD interface of the vehicle and select the corresponding matching mode and model information.
Key to make a new key: Insert a key to turn the switch on, and a safety light will light for about 10 minutes. Within minutes after the safety light is off, turn the ignition switch off, then turn it on again, and the warning light will be on for about 10 minutes. Repeat the previous step for about 30 minutes, the key is prepared, and all the previous keys are invalid.2, many owners do not pay attention to their car keys, car keys fall on the ground or water is often a thing, so it is easy to cause damage to the car key internal chip original, resulting in car key failure, you need to buy a new key to match.
3,Car remote control matching tutorial: If it is in the case of remote control failure, you can do the following matching: in the case of the door is closed, the ignition switch is turned on (the second gear instrument lights are all on) in the close, and then the key is removed; Press and hold the lock button on the key for 10s, and press and open the lock five times within 5S; Let go of both buttons and press either one again. OK, if it doesn't work out. Do it again in the above way.
Key matching method: After the above installation and debugging process is completed How to match the car chip key , the next is the key embryo how to match the car chip key The opening teeth and the ignition anti-theft system How to match the car chip key . The opening teeth of the key embryo can be copied by the owner or the installer providing installation services through the owner of the secondary key provided.
After the car replaces the key chip, it is necessary to use the car computer detector to re-match the key.
Lock core replacement method: if