1, the car remote control key can be re-matched through initial matching, synchronous matching, etc.
2, first of all, you need to buy a blank chip key from an authorized 4S shop. Next, the key is slotted, that is, the key shape and keyhole are precisely tailored to the requirements of your vehicle. After completing this step, take your new key and the key code that came with the car to the 4S shop. There, professional technicians willUse dedicated equipment to match the new key to your vehicle.
3, the car remote control key matching steps are as follows: need to put our vehicle ignition switch in the ON position. Align the new matching remote control with the remote control receiver next to the power window master control switch, control the time within 1-4s, and then press the unlocking and locking button of the remote control. The time is controlled within 1-4s, and the vehicle ignition switch is turned to OFF. The time is controlled within 1-4s, and the vehicle ignition switch is turned to ON.
4, if you need to match the car key chip, you can follow the following steps: First,> Car chip with key , matching method Car chip with key : First of all, remove the remote control cover with the screwdriver, gently go to the key tooth, insert the screwdriver into the hole, turn the screwdriver clockwise, completely separate the two parts of the remote control, after opening, take down the battery, disassemble the circuit board, and finally replace the new battery can be car chip with the key .
2, car remote control key matching steps are as follows: need to car chip with key Our vehicle ignition switch is in the ON position. Align the new matching remote control with the remote control receiver next to the power window master control switch, control the time within 1-4s, and then press the unlocking and locking button of the remote control. The time is controlled within 1-4s, and the vehicle ignition switch is turned to OFF. The time is controlled within 1-4s, and the vehicle ignition switch is turned to ON.
3, the car chip key how to match the car key chip matching method The car chip key matching method: first go to the 4S shop to buy a blank key, and then go to the slot, that is, the keyhole is played well, and finally take a good key and the carTake the key code to the 4S shop to match it. Used in the automotive field, the chip is known as a magnetically coupled forwarding system.
4, the first step: find the key chip model, usually can be found on the label on the key. Step 2: Prepare the matching tool, usually a professional matching machine, it can also be a computer and the corresponding programming software. Step 3: Connect the matching machine or computer to the OBD interface of the vehicle and select the corresponding matching mode and model information.
Yes. Direct toThe 4s shop can re-match a key with a chip. Car keys are equipped with the engine's security chip. The security chip is small. It's a small coil. The main function is that it can be used to modify the data, otherwise the car can not find the car key, the ecu will stop supplying fuel to the engine to achieve the purpose of engine anti-theft.
At this time you can accept the matching key into the keyhole, if the match is smooth, the key matching light will flash, you should immediately operate the unlocking key on the original remote control, and then click the unlocking key of the new remote control, waiting for about ten seconds to complete the key pairing. Finally you can turn the original keyThe chip is removed and installed in the new key, and the whole key matching process is over.
Car keys are also divided into chips and no chips. If it's a key without a chip, you can open the door and drive straight away. And now most of the cars on the market are equipped with engine anti-theft systems, are chip keys. Matching the key in the online shop can only match the tooth shape of the key, and can not copy the chip. Some online shops also provide decoding instrument rental services, the instrument will be rented back, you can copy a new key.
or later there is no, just with a spoon on the car to go to DThey will use the computer to write the chip code of your new key into the BCM. The 4S shop matches the key you bought by yourself. There is no magnetic chip inside. The key uses the chip, which is the magnetic chip system.
Then do the anti-theft match again, in order to start the engine normally. Second, if it is a new electronic key with keyless entry function. For models with one-click start function, this can directly contact the 4s shop for relevant key matching.
1, car remote control keyIt can be rematched through initialization matching, synchronous matching, and so on.
2, the matching process of the car chip key is relatively simple and safe. First of all, car chip with key , you need to buy a blank chip key from an authorized 4S shop. Then car chip with key , the key is slotted car chip with key , that is, according to the requirements of your model, accurately create an appropriate key shape and keyhole. When you're done with this, take it with youYour new key and the key code that comes with the car go to the 4S shop.
3, the car remote control key matching steps are as follows: need to put our vehicle ignition switch in the ON position. Align the new matching remote control with the remote control receiver next to the power window master control switch, control the time within 1-4s, and then press the unlocking and locking button of the remote control. The time is controlled within 1-4s, and the vehicle ignition switch is turned to OFF. The time is controlled within 1-4s, and the vehicle ignition switch is turned to ON.
4, what is the matching method of the car remote control chip? This is a common problem,The following is a detailed description of the problem. When replacing a new remote control controller or remote control key, the remote control chip needs to be matched. The specific steps are as follows: Insert the new key into the driver's side door lock core and turn it counterclockwise, and then hold it in the position for more than 3 seconds.
First car chip with key , determine the corresponding car chip with key Car model and year Car chip with key ; Second, car chip with key , buy the tap key provided by the car manufacturer, install the chip on the tap key, and then insert the key into the ignition lock of the vehicle; Finally, the ECU code of the vehicle is obtained from the manufacturer, and the chip is associated with the ECU code to complete the configuration of the key.
First, you need to buy a blank chip key from an authorized 4S shop. Next, the key is slotted, that is, according to your modelTo precisely create a suitable key shape and keyhole. After completing this step, take your new key and the key code that came with the car to the 4S shop. There, a professional technician will use dedicated equipment to match the new key to your vehicle.
Step 1 Car chip with key : Find the key chip model, which can usually be found on the label on the key. Step 2: Prepare the matching tool, usually a professional matching machine, it can also be a computer and the corresponding programming software. Step 3: Connect the matching machine or computer to the OB of the vehicleOn the D interface, select the corresponding matching mode and vehicle information.
Car chip key matching method: first go to the 4S shop to buy a blank key and then go to the slot is to play the keyhole and finally take a good key and the key code with the car to the 4S shop to match it. The chip used in the automotive field is called a magnetically coupled forwarding system. The magnetically coupled forwarding system is essentially a passive state in which the chip itself does not require constant power supply and therefore does not need to be powered on at all times.
Method of matching car chip keys For the pairing of car remote control keys, it is recommended to go to the 4S shop