This situation is generally caused by the following reasons, it is recommended to check whether the lamp line or lamp holder connector is loose, and carry out the following operations: 1. First check whether the lights are loose or shaken, if this is the problem, you can re-assemble the lamp, check whether the lamp holder is firm. 2. Check whether the bulb line is loose or in poor contact, see if the connection of the wire is loose, and you need to reinsert or repair the line. 3. Sometimes there will be voltage instability, resulting in different brightness of the bulb.
You can check whether the battery voltage is stable and whether the electrical system of the vehicle is working properly. To sum up, if the Honda Fit headlights appear a light a dark situation, it is recommended that the owner of the above inspection and maintenance.
The answer is as follows: a light and a dark situation may be caused by poor bulb connection or circuit failure, it is recommended to go to a professional auto repair shop to check and repair. If the bulb is not broken, it may be caused by poor contact with the bulb holder or a circuit fault, which requires professional technicians to check and repair. Do not disassemble or replace auto parts by yourself to avoid greater losses and safety risks.
Hello, Honda Fit car headlights appear a light a dark situation, there may be many reasons for this problem. One possible cause is a circuit fault, and another may be an improperly adjusted lampshade. To solve this problem, you can consider checking whether the address of the headlight is correct, or adjusting the lampshade. If these do not work, it is recommended that you contact a professional car repair service to check and prevent the problem from aggravating. I hope I can help you.
Hello, this situation may be due to the following reasons:
1. Poor bulb holder: Check whether the bulb holder is clean, without loosening or oxidation.
2. Poor circuit connection: Check whether the circuit connection is good, including the connection between the bulb and the circuit and the connection between each power supply.
3. Circuit failure: Check whether there is a fault in the vehicle circuit, such as possible faults including fuses, relays, switches, etc.
4. Controller module fault: Check whether the controller module is faulty.
It is recommended that you go to the regular auto repair shop to check and find the fault point to solve the problem.
Check whether the circuit connection is loose or corroded, if the circuit connection is normal, it may be caused by lamp holder damage or circuit board failure, and it needs to be repaired and replaced by a professional auto repair shop.
Check whether the circuit and cable connections are normal.
Because the Honda Fit headlights appear to be bright and dark, it is likely that there is a problem with the circuit or wiring, resulting in unstable current, resulting in uneven light and dark bulbs.
It is recommended to check whether the circuit and wiring of the vehicle are normal, and if there is a problem, it needs to be repaired or replaced in time. In addition, you can also consider replacing the light bulb, because sometimes the light bulb is not broken, but there will be uneven light and dark.
Need to check the headlight circuit, electrical accessories are damaged.
1. The headlights appear one bright and one dark, which may be caused by problems with the circuit or electrical accessories.
Need to check the headlamp connection wire, bulb holder, bulb is in good contact, check whether the headlamp circuit is damaged, such as whether the fuse is burned out. 2. If there is no problem in checking the circuit and electrical accessories, you can consider checking the power system of the vehicle, such as whether the battery is normal and whether the generator is normal. 3. If the problem persists, it is recommended to go to a professional car repair shop for a comprehensive diagnosis and repair.
Under normal circumstances, if you turn on the headlight, the small light normally lights up, it is the headlight bulb burned, according to your introduction, may be the internal problem of the combination switch, may need to replace the combination switch.