The Fit battery has a capacity of 42Wh and a voltage of 11.1V, so its battery capacity is 3800mAh.
This data is determined according to the specifications of the Fit battery, which is a known conclusion.
The size of the capacity is an important indicator to measure the battery life, while the voltage is an indicator to measure the output power of the battery, different voltage and capacity will have different effects on the output performance of the battery.
If you need to use electronic devices with larger battery capacity, you need to choose batteries with larger battery capacity, such as game books or high-performance notebooks, and for people who need a long battery life for ordinary use, you also need to pay attention to the size of the battery capacity. At the same time, it is also necessary to select the appropriate battery according to the voltage requirements of the electronic device to ensure the compatibility of the device.
36 ampere
Honda Fit battery is 36 amps. Honda Fit original battery uses Yuasa 40B19L, the specification is 12V36AH.
The battery life of Fit is 2-3 years, and the original battery of the new car can be used for more than 3 years. So if your battery has been used for almost two years, it should be noted that its service life may have expired. At this time, you should check more, do a good job of detection in advance, find that the problem is solved or replaced as soon as possible, and avoid the loss caused by the battery suddenly \"lying down\" during use.
The Fit battery is 13.6 amps.
Because the Fit battery has an ampere-hour of 13.6AH, this means that the battery can provide 13.6 ampere-hours of current to the device for one hour. However, it should be reminded that the battery capacity is not the bigger the better, and the appropriate battery capacity needs to be selected according to the power consumption and use time of the device.
The capacity of a battery, usually described in ampere-hours of capacitance.
ampere-hours describe how many amperes of current a battery can provide for how long.
Not all batteries are suitable for all devices, so we need to better understand the capacity of the battery and the needs of the device to choose the most suitable battery.
The Honda Fit battery size is 36 amps. The original factory uses Tangqian 40B19L battery, the specification is 12V36AH. If a loss of power or leakage problem is found, the battery should be replaced, otherwise the vehicle cannot start and the load in the car will lose power.
Fit, as a mobile phone brand, has a battery capacity of 2,959 mAh, which is able to provide users with a long-term use experience.
At the same time, Fit has further extended battery life by optimizing its systems and hardware to reduce energy consumption.
If you need to use the phone for a long time, it is recommended to optimize the use of the phone, such as reducing unnecessary background applications, turn off unnecessary notifications, etc., in order to extend the battery life.
In addition, spare batteries or power banks are also a good choice.
Honda Fit battery is 36 amps.
Honda Fit original battery uses Yuasa 40B19L, the specification is 12V36AH. The battery can be replaced if there is a loss of power or leakage, otherwise it will cause the vehicle to be unable to get into the car and the load in the car is out of power.
Fit battery bonding method is:
1. The positive symbol of the battery is, and the negative symbol is -;
2, the positive and negative terminals are respectively connected to the positive and negative ports of the battery (this operation should ensure that the two cars are in the flame off state);
3, successfully start the power loss vehicle, you can take the cable, let the engine work for about 20 minutes, to ensure that the battery stored a certain amount of electricity.
Fit battery 1500 AMps. The capacity of the Fit battery is not very large, generally only 1500 amps, but because of the relatively high density of work, the battery life is still very long, about 3 to 4 hours
The Fit battery is 36ah.
Fit battery replacement method is:
1, open the engine cover, find the battery location;
2. Remove the nut fixing the support and the battery protection cover;
3. Remove the port at the junction of the two poles (remove the negative electrode and then remove the positive electrode). Because the negative electrode is connected to the body, this prevents the metal removal tool from touching the body by mistake, resulting in a short circuit;
4. Remove all the fixing screws on the battery and take out the old battery. (Note: In order to prevent the electrolyte from flowing out, the tilt Angle when taking out the battery should not exceed 40°);
5, finally replace the new battery.
The Fit battery is 45AH