Redmi 11 Pro supports PD protocol maximum output power of 67W fast charge, if you use 120W charger can charge faster, but need to note the following points:
1. Since the Redmi 11 Pro supports a maximum power output of 67W, the 120W charger, while usable, does not really achieve full speed charging. 2. The use of excessive power charger for a long time may cause greater damage to the battery, so it is not recommended to frequently use a strong charger to charge, which may cause potential damage to the battery. 3. Using the charger of the factory device or the certified charger is the safest and healthiest way to charge. It is recommended not to replace the charger at will to avoid safety risks.
Redmi 11 Pro supports a maximum of 67W charging power, and a 120-watt charger may bring some security risks to the phone, so it is not recommended to use a 120-watt high-power charger. It is recommended to choose a charger according to the maximum charging power given by the official Redmi 11 Pro to ensure charging efficiency and safety. Using the wrong charger will cause damage to the phone battery and device, and may even lead to overheating and explosion of the device, bringing safety risks to your use.
1120 Watt chargers are not recommended. Because the official standard of the Redmi 11pro is 33W (maximum 67W), there is a risk of overcharging using a higher power charger, which may damage the battery and even cause safety issues such as fire.
3 If you need a faster charging speed, you can choose the official recommended fast charge or when buying a third-party charger, you need to confirm that its power matches the phone, and do not blindly pursue fast charging and ignore safety issues.
Redmi 11 Pro is a mobile phone that supports 67W fast charge, if you use a 120W charger, it may cause damage to the battery, so it is not recommended to use a 120W charger. Although the Redmi 11 Pro supports the PPOO protocol and can support up to 100W fast charge, it is actually best to use the original 67W fast charger or a compatible 65W or less power charger to ensure the life and safety of the phone battery. When choosing a charger, it is best to choose a regular brand and a legally certified product to ensure safety and quality.
Redmi 11pro can not use a 120W charger, Redmi Note11 Pro does not support 120W fast charge, Note11 Pro only supports 67W cable flash charge, and supports 120W fast charge is a higher Redmi Note11 Pro, so be sure not to get confused, The Redmi Note 11 Pro is powered by Mediatek's Guet 920 octa-core processor and comes preloaded with the MIUI 12.5 operating system based on Android 11.
Rear 108-megapixel main lens 8-megapixel ultra-wide-angle lens 2-megapixel macro lens three-shot, front 16-megapixel lens; Non-removable battery with 5160 mah capacity; Support multi-functional NFC, WiFi 6, Bluetooth 5.2 and X-axis motor; For 5G full Netcom mobile phone.
No, the Redmi 11 Pro supports 67W fast charge, not 120W charger. If you use a 120W charger to charge, it may cause charging problems with the phone, such as overheating, battery damage, etc. Therefore, it is recommended to use the official recommended original charger or a charger of the same power to charge to ensure the safety and stability of the phone.
The Redmi 11pro comes with a 67W charger, and if a 120W charger is used for charging, it can theoretically be fully charged faster, but this will have a certain impact on battery life, and there may be a certain safety risk. Therefore, it is recommended to charge according to the charger recommended by the manufacturer, which can ensure the safety of electricity and charging efficiency, and extend the battery life to the greatest extent. If you have a serious need to charge faster, you can consider using a charger that supports faster charging, but pay attention to when and how you charge to avoid excessive damage to the battery.
< br >
The official standard chargers for the Redmi 11pro are 67 watts of wired fast charge and 67 watts of wireless fast charge. While some manufacturers make fast chargers that exceed 120 watts, using these chargers that exceed standard fast charging power can cause more damage to the phone's battery and may pose risks to the phone's hardware and software. Therefore, when using the Redmi 11pro, it is recommended to use the standard 67 watts of wired fast charge and 67 watts of wireless fast charge to ensure the normal operation and service life of the phone. Do not use chargers above 120 watts.
The Redmi 11pro can use a 120 watt fast charger, but the following points need to be noted:
First of all, the charger must support QC5 or PD protocol;
Secondly, if you use a third-party charger, be sure to ensure that the charger brand and quality are reliable, do not use inferior chargers, so as to avoid damage to the phone;
Finally, if the charger power is too large, it may cause overload or even damage to the mobile phone charging circuit, it is recommended to read the mobile phone manual carefully before use and follow the manufacturer's recommendations.
Redmi 11 Pro standard charging head power is 67W, using 120W charging head will have an impact on the phone?
In fact, if you use a 120W charging head to charge, the phone will not have a significant impact on the whole, because the process of charging the phone is controlled by the phone itself, and will only absorb the voltage and current suitable for it, and will not accelerate the charging due to the high power of the charger. However, for the charging head with too much power, we still need to use caution, because if you choose an inferior charger, it may bring unexpected security risks to the phone.
Redmi 11Pro is supported " USB PD 3.0 Fast Charge Protocol " It supports a maximum of 67W fast charge power. According to the specification, if using support " USB PD 3.0" The fast charger of the protocol is charged, then the charger and the mobile phone will negotiate a maximum charging power, that is, if the 120W fast charger is used, the charger and the mobile phone will negotiate a maximum charging power, and the final charging power will be limited to the supported maximum charging power of 67W. Therefore, if you have a 120W charger, you can use it but the charging power will not exceed 67W. It is recommended to use the original charger.
Mi 11pro does not support 120w fast charge, Mi 11pro mobile phone supports 67W wired flash charge 67W wireless flash charge 10W wireless backcharge, its built-in 5000mAh battery, support QC4\/QC3 \/PD3.0 fast charge protocol.
The Redmi 11pro supports up to 67 watts of fast charging, which is not possible with a 120 watt charger. At the same time, high-power chargers generate too much heat, which may cause damage to components such as phone batteries and circuits. Therefore, it is recommended to use the charger or charging cable recommended by the founder or Xiaomi to charge to ensure the best charging effect and safety. In addition, it is also necessary to avoid charging at too high a temperature or strong light, so as not to affect the charging effect and equipment life.
Redmi 11 Pro supports a maximum of 67W fast charge, and when charging with a 120W charger, the phone will control the charging rate according to its own battery temperature and power, so it can also charge normally. However, when using a 120W charger to charge, you need to pay attention to some matters, such as choosing a genuine charger to ensure that the voltage and current are stable and avoid unnecessary safety risks. In addition, it is recommended to pull out the charger when appropriate, because long-term use of high-power chargers will shorten the battery life of mobile phones. In short, it is necessary to be careful when using the 120W charger to charge, follow the correct use method, and improve the charging speed under the premise of ensuring the charging safety.
Redmi 11 Pro official nominal support 67W fast charge, so if the use of 120W charger, there may be too high voltage and current, the mobile phone charging chip and battery may cause irreversible damage, it is recommended to use the official supporting 67W charger, can better protect the mobile phone hardware, but also fast charging. If you want to charge more quickly, you can consider buying a power adapter that supports 100W or more to charge your phone, but it should be noted that you must ensure that the quality of the power adapter is good to avoid damage to the phone and safety issues.
The official charger of Redmi 11 Pro is 67W fast charge, which supports a maximum of 67W charging power. If you want to use a 120W charger to charge the Redmi 11 Pro, there is a potential risk that this could have a negative impact on the phone's battery and motherboard. Therefore, it is recommended that you use the original charger to ensure the performance and stability of the phone. If you must use another charger, make sure it fits your phone and uses a genuine manufacturer's product, and avoid using an unofficial charger of poor quality.
Redmi 11 Pro supports up to 67W fast charging technology, using a 120W charger to charge the phone will not significantly improve the charging speed, while using a charger that exceeds the maximum power of the phone may cause damage to the phone battery, so in daily use it is recommended to use the original charger or a charger that meets the specifications of the phone to charge. In addition, in order to protect the internal circuit of the phone and extend the battery life, it is recommended to avoid overcharging and excessive discharge, and try to keep the power between 20% and 80%.
The Redmi 11 Pro supports fast charging up to 67W, so a 120W charger can theoretically be used, but according to official advice, it is recommended to use an official charger that matches the phone to ensure charging speed and security. For unofficial fast chargers, it may have adverse effects on the phone, such as accelerating battery aging or increasing the risk of battery failure. Therefore, it is very important to buy and use the right charger and cable. At the same time, we should also pay attention to avoid excessive use of the phone during the charging process to prevent excessive heating from causing battery damage.
Redmi 11 Pro built-in 4500mAh battery, support 67W wired fast charge, 67W charger can be filled with battery in a short time, and has a relatively high security, while protecting the battery life of the mobile phone, recommended to use the original or regular brand of the corresponding power charger. Although you can use a 120W charger, but doing so may have a certain impact on the security of the phone, it is recommended to use the recommended original or regular brand charger and the corresponding charging accessories.
The charger equipped with the Redmi 11pro has a power output of 67 watts, and charging with a 120 watt charger will not improve the charging speed, nor will it cause any benefit to the phone, but may cause the battery to overheat, shorten the battery life and other adverse consequences.
Therefore, it is recommended to use the original charger or the output power of the same or slightly higher charger to ensure the relative safety of the phone and battery life. At the same time, it is also necessary to avoid using low-quality or incompatible chargers to charge, in order to prevent problems such as overheating of the battery.