Large board tile hook paste method is as follows
< br >
1. Wipe the wall before sticking.
< br >
The place of the adhesive hook must be as smooth and flat as possible to increase the contact area between the adhesive substance and the wall as much as possible. Many people know this. But what many people don't know is that before attaching the hook, be sure to wipe the wall clean with a damp cloth to remove dust, and then wipe off the water with a dry cloth (or paper towel). Dust on the wall will destroy the stickiness of the hook to a large extent, resulting in the failure of the hook.
< br >
2, if you are not in a hurry, wait for half an hour after drying the wall to ensure that the water completely evaporates, the effect is better.
< br >
After pasting, hold the hook with your hand for at least 1 minute (theoretically, the longer the better, of course). Always make sure that the adhesive material is fully bonded to the wall, many people stick and then let go, which is not enough.
< br >
3, please do not hang heavy objects immediately. Under normal circumstances, after the hook is glued, the hook and the wall will be alone for at least 24 hours, if you want to have a good effect, 48 hours is better. Many people are anxious to hang things as soon as they are glued, which will give the hook a force, so that the sticky material leaves the wall and cannot be fully integrated. So give the goo at least 24 hours
There are the following ways to attach the large board tile hook:
< br >
1. Drilling and fixing method: Use an electric drill to drill and fix the hook on the tile. This method requires the use of professional tools and requires accurate measurement of hole spacing and depth to avoid damaging the tile.
< br >
2. Glue fixing method: Use strong glue to stick the hook on the surface of the tile. This method is relatively simple, but you need to choose a corrosion-resistant, high-strength glue, and pay attention to the weight of the hook does not exceed the glue bearing limit.
< br >
3. Magnetic fixation method: Use a magnetic hook to directly adsorb the hook on the surface of the tile. This method is more convenient and does not require drilling and adhesive, but it is necessary to take care that the weight of the hook does not exceed the magnetic bearing limit.
< br >
It should be noted that no matter which method is used, it is necessary to choose a hook with good quality and strong load-bearing capacity, and pay attention to the weight of the hook not to exceed its load-bearing limit. In addition, in order to avoid damage to the tile, it is recommended to test paste in a less conspicuous position to ensure that the selected paste method can firmly fix the hook and will not affect the beauty of the tile.
The sticking method of the hook is as follows: First, determine the position of the hook and use a level to ensure the level.
Then, use professional tile glue to attach the hook to the tile, making sure the glue is evenly spread.
Wait for the glue to dry, drill a hole in the tile using a professional tile drill bit, and then secure the hook inside the hole.
Finally, wipe the surface of the tile with a clean, damp cloth to ensure that no glue remains. In this way, the large board tile hook can be firmly installed on the wall.
1. Natural fit: Usually the suction part of the hook has a certain suction, if you want to hang the hook on the tile wall, you first need to clean the suction cup and tile wall, the hook's suction cup is directly attached to the tile wall, and the air inside the sucker is squeezed out by hand, so that the hook can be hung on the tile wall.
2. Double-sided adhesive bonding: To prepare a good double-sided adhesive, it is still necessary to clean the suction cup of the hook and the tile wall, without water, dust, oil stains and other substances, otherwise the tile wall can not hang the hook on the tile wall, the hook is stuck on the tile wall, you need to squeeze the suction cup and wait for a period of time to hang things.