Here are the basic steps to use the DJI Osmo Action 3 magnetic clip:
1. Make sure the camera connection is connected: Make sure the camera is turned on and connected to your phone or other device so you can monitor and adjust the camera position at any time.
2. Ready to use a magnetic clip: Insert the magnetic clip into the bottom of the silicone protective case and secure it, then place it on the location where the camera needs to be mounted, such as a desktop, wall, or other smooth surface.
3. Fix the camera: Gently press the camera on the magnetic latch and rotate the camera so that it is at the desired Angle and position.
4. Adjust the Angle of view: If you need to adjust the Angle of view of the camera, gently move the camera or readjust the position of the magnetic clip as required.
5. Safe disassembly: After the motion or scene recording is completed, remove the camera from the magnetic buckle and carefully lift the magnetic buckle to avoid distortion or damage.
Simple to use because the DJI Action3 magnetic clip is the camera and the base through the magnetic adsorption together, as long as the bottom of the camera magnetic contact the bottom of the base magnetic, you can firmly fix the camera on the base.
When using, as long as the base is fixed in the required position (such as a bicycle helmet, etc.), the camera is close to the base, and the magnetic absorption is automatically absorbed and firmly fixed.
It should be noted that the contact surface between the base and the camera should be clean when used to avoid dust and foreign matter affecting the adsorption effect; Also be careful to avoid magnetic objects touching the base and camera.
The method of use is very simple, just need to fix the magnetic buckle on the corresponding bracket, you can install the DJI Action3 camera on the bracket.
Because the magnetic buckle has good magnetism, it can ensure that the camera is firmly fixed on the bracket, and avoid the camera moving or falling off during use.
At the same time, this design is also easy for users to quickly remove the camera, easy to shoot.
The DJI Action 3 magnetic clip can be used by following steps:
< br >
1. Ensure that the magnetic buckle and Action 3 are attached to each other, and locate the slot of the magnetic buckle.
< br >
2. Insert Action 3 into the slot of the magnetic buckle and gently press it down.
< br >
3. Install the magnetic buckle in the desired manner, such as securing it to a seat belt or other device.
< br >
4. Start Action 3 by selecting the desired mode in the Mode\/Power button.
< br >
5. When shooting with Action 3, ensure that the magnetic buckle is firmly fixed on the device to ensure safety.
< br >
6. When finished, gently remove Action 3 from the magnetic buckle and place it back in the magnetic buckle for next use.
< br >
Note: When using magnetic clasp, please pay attention to safety and ensure that it is in a strong condition. If a more secure installation is required, use other accessories such as handles.