First, place the outdoor antenna.
< br >
As long as the antenna is placed in a place where the signal is stable (not necessarily full), such as placing the outdoor antenna on the top of the outdoor air conditioner, or beside the window, balcony, etc.
< br >
Second, connect the antenna
< br >
Connect the outdoor antenna with cable to the outdoor port of the host, and connect the indoor antenna without cable to the indoor port of the host. If the outdoor and indoor interfaces are indicated on the host, be careful not to connect it backwards!
< br >
Third, connect the power supply
< br >
Place the host in the room where the signal needs to be covered, either on the ground or on the table. Note: The host should maintain a certain distance from the outdoor antenna, preferably more than 7 or 8 meters, if there is a wall barrier, 4 or 5 meters can also be used.
< br >
Then, connect the power supply and power on.
< br >
After the power is on, wait a minute or two.
< br >
At this point, the mobile phone signal amplifier begins to work, you can pull out the phone to see how the signal is.
one
You can change the mobile phone operator, the signal difference may be the signal tower service base station far away, or the radiation difference caused.
two
Check whether there is a problem with your mobile phone, and do a mobile phone network signal detection.
three
The house is too airtight, you can open the window to see if the signal has improved.
four
Install a cell phone amplifier in the house.
If your indoor signal is not good, you can consider the following ways to improve the indoor signal:
< br >
1. Use a signal amplifier (also known as a signal booster), which is able to enhance the mobile phone signal and improve the range and quality of the received signal.
< br >
2. Use a Wi-Fi phone, some new smartphones and software, such as Skype, wechat, etc., offer the option to make voice calls over a Wi-Fi network.
< br >
3. Open a nearby window or door. It may help to improve the orientation and position of the signal received.
< br >
4. The use of metal mesh house signal enhancers, these metal mesh devices can reduce signal interference to improve the indoor signal quality and range.
< br >
5. Consider moving improved sources of interference, such as Bluetooth and WiFi devices, to ensure that these devices do not interfere with the signal.
< br >
No matter what the problem is with your mobile phone signal, you can contact your mobile phone provider for advice on improving the quality of your signal.
solution
< br >
1. It is recommended that you check whether the mobile phone uses a metal protection case, magnetic protection case, magnetic holder or magnetic suction cup. It is recommended that you remove the metal and magnetic materials easily cause signal interference, resulting in the deterioration of the mobile phone signal.
< br >
2. Restart the router and check whether the signal is normal.
< br >
3. It is recommended that you move to the area where the router's signal coverage is strong. There is occlusion or the distance from the router will affect the signal