After installing the wired broadband, you can determine whether to buy a router by detecting the WiFi signal strength of the mobile phone.
First of all, the mobile phone connects to the wireless WiFi of the light cat, and then the whole house checks the WiFi signal strength.
If it is the wired broadband installed in the past three years, the light cat must be with wireless WiFi function, wireless WiFi account and password please see the light cat bottom label sticker.
Fill in the wireless account and password in the mobile phone, connect the WiFi, and then go to the furthest room from the light cat, check the WiFi signal strength, the viewing method is to see the number of mobile phone wireless signal, generally four cells is full, three cells can also be smooth Internet access, if only two cells, indicating that the signal is not strong enough, the Internet will compare the card. The more professional way to detect WiFi signal strength is, of course, to download wireless WiFi detection APP, which is more troublesome, there are still many such apps, you can download an APP with more downloads. If your home area is not very large, the partition wall is not a lot, the three-cell signal must be there, it should be easy to connect to the wireless WiFi Internet, there is no need to buy a wireless router. If your home area is large, the farthest room from the light cat wireless WiFi signal is below two cells, then you need to consider buying a wireless router.
Wireless router layout, connection and setup methods:
After you do want to buy a wireless router, it is best to put the router in the middle of the whole house, so that wireless WiFi can cover all rooms evenly. As shown in the figure: Put the wireless router in the living room, and then connect it to the WAN port of the wireless router in the living room through the super Class 5 network cable or Class 6 network cable from the optical cat LAN port, so as to ensure that each room such as the master bedroom, second bedroom and study room has a strong wireless WiFi signal strength.
After the wireless router is plugged in, wait a moment, your mobile phone can see a wireless WiFi without a password, the mobile phone is connected, and then the mobile phone opens the browser, enter the IP address of the newly bought wireless router, generally :192.168.1.1 or 192.168.0.1, you can view the router Settings manual or the label sticker at the bottom of the router. The first time you enter the router Settings page, you will be prompted to set a new password, and then you can go to the router Settings page.
First set the WAN port Internet access mode, we generally select \"automatically obtain IP\
Then set the wireless WiFi account password, password as complex as possible, after all, there are more tools such as universal WiFi keys now, the setting is too simple and easy to give the neighbor to steal the network, the channel is selected automatically.
< br \/ >
Then save, restart the wireless router, the mobile phone connects to the wireless WiFi account and password you just set, you can play the network.
summarize
After cable installation, first use the light cat wireless, to determine the wireless signal is strong in each room, there is no need to buy a wireless router, if the wireless signal is indeed not strong enough, then buy a better wireless router, the best gigabit, four antennas, support 2.4G and 5G, through the wall ability of the wireless router, the router setting method is much the same, The steps to install me can be easily set up, it is best to look at the user manual first.
Install broadband at the same time have a broadband account and at the same time connector and enter the password! You can't connect to your phone, so you need to get a reroute from your carrier and they'll tell you where your hot spot is. Your phone must be lost. Hot spot password after several devices to access the Internet (such as my home can be connected to 5 mobile phones and tablets at the same time), light broadband is not connected to the power route, the router's light will not be on is equal to no network at home will not connect to the server!
If your broadband is installed in the last one or two years, whether mobile or telecom or Unicom is the light cat with WFIF. Of course, the effect is not better than a professional router, but there is no problem with normal use. It can also save money, but many teachers will not tell you if they have trouble, or he wants to sell you the router will turn off its own WFIF. If you look closely at your light cat there is a wireless two-word switch on it and you hold it down to turn on the WFIF password which is usually under the light cat's belly and you see that the eight digits behind that key are the password.
The room area is not large, you can use fiber cat routing, if the area is relatively large, and involves through the wall, it has to be equipped with a router, otherwise the signal is poor, the network speed is slow.
First of all, thank you very much for being here to answer this question for you, let me walk you through this question, and now let's explore it together.
If you want to connect to the wireless network on your phone, you must have a router and turn on the wireless network through the relevant Settings.
However, some broadband operators provide light cats with routers and wireless functions, so there is no need to buy a separate router. Otherwise, you need to buy a router.
Generally, on the back of the router, there is the address of the login setting interface and the initial account and password.
The default IP address is 192.168.0.1 or 192.168.1.1
The default password is admin
Enter this IP address in the browser address bar, you can enter the router Settings interface, use the default account password login Yes, you can follow the prompts to set.
The answers to this question are all personal opinions and suggestions, and I hope the answers I share with you can help you.
At the same time, I hope you can enjoy my sharing. If you have a better answer to this question, I hope you can share your comments to discuss this topic together.
I finally here, I wish you a happy work every day happy life, healthy life every day, home and everything, every year to make a fortune, business is booming, thank you!
Now when installing broadband, the optical cat equipment provided by the operator generally has WiFi function, I do the broadband of China Mobile, the optical cat equipment provided by the mobile has its own WiFi function, as long as it is enabled in the setting interface of the optical cat.
However, the wireless signal of the light cat is not very strong, and there will be bad signal coverage far away or across the wall. Therefore, it is still recommended to add a wireless router device to make wireless signal coverage wider, faster and more efficient.
If you want to connect to the wireless network on your phone, you must have a router and turn on the wireless network through the relevant Settings.
< br \/ >
However, some broadband operators provide light cats with routers and wireless functions, so there is no need to buy a separate router. Otherwise, you need to buy a router.
< br \/ >
Generally, on the back of the router, there is the address of the login setting interface and the initial account and password.
The default address is 192.168.0.1 or 192.168.1.1
The default password is admin
Enter this IP address in the browser address bar, you can enter the router Settings interface, use the default account password login Yes, you can follow the prompts to set.