10 minutes
Apple 13 points in the water 10 minutes out of 1, if it is in the case of electricity fell into the water. Pull out the power as soon as possible, and then vigorously shake dry, but do not shake the machine off, the idea is to shake out the water in the screen. If there are any droplets left on the screen, there will be traces when it dries. Place under a light heat source such as a table lamp or spotlight to allow the water to dissipate slowly. The process takes more than six hours. Do not rush to use strong heat sources such as hair dryers. After this treatment, the power supply can basically work normally. 2, in the case of power failure into the non-corrosive liquid. In this case, you can basically assume that the machine is not damaged. But maybe the LCD screen will be ugly. Shake it dry, but don't shake the machine off. If there is no trace on the LCD screen, follow point 1. If there is something left on the screen and it is very serious, do not press the first point, because the electronic circuit after this treatment can work normally, but the screen may be ugly. It can be sent to the nearest maintenance department for processing or disassemble the machine by yourself.