at stake
You can try to physically cool down, such as putting it in the air conditioning vent, and then check what power-consuming procedures are opened after the temperature drops, and close it.
2, if the phone is already very hot, you can turn it off immediately.
3, when the heating trend is relatively large, it may be that the use of time is too long, you can take a rest, turn off GPS positioning, WiFi, Bluetooth, etc., or direct flight mode.
The iPhone was scalded by boiling water
To the factory network detection and maintenance, mobile phone drop water treatment suggested treatment:
1, remove the battery do not press any key, do not shut down, just open the back shell of the phone to remove the battery. If it's a phone like an iPhone that can't be prised open to remove the battery, be careful to shut it down as soon as possible and cut off the power to prevent the phone from shorting out.
2. Do not use a hair dryer to dry or take it to the stove to bake, because the external heat will damage the precise electronic components inside the phone. Do not try to open the mobile phone, this is the wrong approach, so even if the phone itself is not damaged, once the boot, it may cause the result of burning the motherboard, or the motherboard short circuit! The correct approach is to wipe quickly with a clean towel to ensure that water does not flow into the charging port, headphone jack and other jacks. If you find that water has flowed through the interface or gap into the phone, carefully blow the water out with compressed air, never blow deeper.
3, drying treatment can prepare some desiccant or drying box, collect the desiccant, the soaked mobile phone and desiccant sealed together. Or put the mobile phone under a light heat source such as a lamp or spotlight to let the water slowly disperse. Wait until the phone is completely dry, try to turn it on and use it to try to operate various functions.
4, if you can not turn on or try to operate the fault, it is recommended to the manufacturer network engineers with professional equipment testing and maintenance.
2. Because the iPhone is an electronic product, hot water will cause damage to internal components, which may affect the normal use of the phone.
Therefore, immediate measures are needed to reduce the damage. 3. First, immediately remove the phone from the hot water and wipe the surface moisture with a clean towel or paper towel.
Then, place the phone in a ventilated and dry place, away from direct sunlight, and let the phone dry naturally. At the same time, you can put the phone in a sealed bag and add some desiccant (such as a desiccant bag, rice or silicone bag) to help absorb moisture.
Finally, wait at least 24 hours to make sure the phone is completely dry before trying to turn it on.
If the phone does not work properly, it is recommended to seek professional repair services or contact Apple customer service for help.